Cisco Single-Wide High Density Analog Voice Service Module With 16 FXS And 2 FXO

Cisco Single-Wide High Density Analog Voice Service Module With 16 FXS And 2 FXO

New 
Cisco Single-Wide High Density Analog Voice Service Module With 16 FXS And 2 FXO - For Voice - 16 x RJ-21 FXS, 2 x RJ-21 FXO - Twisted Pair
0 Review(s) Item: SM-X-16FXS/2FXO= | By: Cisco |  0 In Stock

Sorry This Product is Currently not Available to Buy.

Sorry This Product is Currently not Available to Buy.

You may be also interested
Cisco Single-Wide High Density Analog Voice Service Module With 16 FXS And 2 FXO - For Voice - 16 x RJ-21 FXS, 2 x RJ-21 FXO - Twisted Pair
For Voice - 16 x RJ-21 FXS, 2 x RJ-21 FXO - Twisted Pair

Product Specifications

Interfaces/Ports Details2 x RJ-21 FXO
Interfaces/Ports Details16 x RJ-21 FXS
Application/UsageVoice
Brand NameCisco
CompatibilityCisco 4000 Series ISRs
Connector TypeRJ-21
Country of originChina
Depth7.6"
Height1.6"
ManufacturerCisco Systems Inc
Manufacturer Part NumberSM-X-16FXS/2FXO=
Manufacturer Website Addresshttp://www.cisco.com
Marketing InformationThe Cisco® High-Density Analog Voice and Fax Service Modules provide enterprises managed services providers and service providers the ability to directly connect public-switched telephone networks (PSTNs) and existing telephony equipment to Cisco 4000 Series Integrated Services Routers (ISRs). These fixed-port (FXS and FXO) modules provide Dual-Tone Multifrequency (DTMF) detection voice compression and decompression call progress tone generation Voice Activity Detection (VAD) echo cancellation and adaptive jitter buffering.

Product details

The FXO port is used to connect to PBX or key systems or to provide off-premises connections to the PSTN. It supports battery reversal detection and caller ID. The FXO port is also used to connect to analog Centralized Automatic Message Accounting (CAMA) trunks to provide dedicated E-911 service (in North America only).

The FXS port is used to connect analog phones modems fax machines and speaker phones to an enterprise IP voice system so you can use them as extensions to your Cisco or third-party IP call-control system. Having these devices tightly integrated with the IP-based phone system is advantageous for increased manageability scalability and cost-effectiveness. The Direct Inward Dialing (DID) port is used to provide off-premises DID connection from the central office. It serves only incoming calls from the PSTN. Caller ID is not supported in DID mode.
Media Type SupportedTwisted Pair
Product NameSingle-Wide High Density Analog Voice Service Module With 16 FXS And 2 FXO
Product TypeService Module
Total Number of Ports18
Twisted Pair Cable StandardCategory 5
Twisted Pair Cable StandardCategory 3
UPC Alternates889728056960
Weight (Approximate)1.98 lb
Width7.4"

Material Safety Data Sheet
A Material Safety Data Sheet (MSDS) is a document that contains information on the potential hazards (health, fire, reactivity and environmental) and how to work safely with the chemical product.

Sorry this product does not have any reviews at this time.
How do you rate this product?

Recently Viewed Products
Time to Rendor : 0.2226563
Powered by Power-eCommerce.com