Tripp Lite 1000VA 800W UPS Smart Lithium Ion LiFePO4 AVR LCD USB DB9 2URM
| $888.56 Retail $2,396.16 |
- Lithium UPS provides 1kVA capacity power protection for critical network components
- LiFePO4 battery backup lasts longer and weighs less than equivalent lead acid battery
- 6 NEMA 5-15R outlets-4 of them switchable-deliver power to rack equipment
- 570-joule surge protection shields connected devices from damaging surges and spikes
- High 95% line-mode efficiency helps save BTU heat output and energy costs
2U Rack/Tower - AVR - 2.70 Hour Recharge - 8.30 Minute Stand-by - 120 V AC Input - 120 V AC Output - 6 x NEMA 5-15R
Product Specifications
| Load Capacity (VA) | 1000 VA |
| Load Capacity (W) | 800 W |
| Output Frequency | 60 Hz |
| Receptacle Detail | 6 x NEMA 5-15R |
| Storage Relative Humidity | 95% |
| Storage Temperature | 5°F (-15°C) - 122°F (50°C) |
| Waveform Type | Pure Sine Wave |
| Alarm | UPS Fault |
| Alarm | Overload |
| Alarm | Remote Shutdown |
| Alarm | Power Failure |
| Alarm | Low Battery |
| Application/Usage | Telecommunication |
| Application/Usage | Network |
| Application/Usage | Server |
| Backup/Run Time (Full Load) | 8.30 Minute |
| Backup/Run Time (Half Load) | 20 Minute |
| Battery Chemistry | Lithium Iron Phosphate (LiFePO4) |
| Brand Name | Tripp Lite |
| Country of origin | China |
| Depth | 12.5" |
| Environmental Certification | RoHS |
| Environmentally Friendly | Yes |
| Form factor | Rack/Tower |
| Height | 3.5" |
| Input voltage | 120 V AC |
| Input Voltage Range | 83 V AC - 147 V AC |
| Limited Warranty | 5 Year |
| Load Capacity | 1000 VA/800 W |
| Manufacturer | Tripp Lite by Eaton |
| Manufacturer Part Number | SMART1000RM2UL |
| Manufacturer Website Address | http://www.tripplite.com |
| Marketing Information | Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery This Tripp Lite SmartPro® UPS lithium battery backup features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life more cycles and faster recharge. It more than doubles the service life of an equivalent lead acid battery and offers up to three times more charge/discharge cycles. It recharges to 100% capacity in less than three hours making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery has 60% the weight of an equivalent lead acid battery which reduces the overall UPS weight. 120-Volt Battery Backup Keeps Equipment Operating Through Short Power Failures The SMART1000RM2UL provides up to 20 minutes (half load) and 8.3 minutes (full load) of battery backup as well as AC power protection for critical server network and telecom equipment. In case of a prolonged blackout the single-phase lithium UPS system gives you enough time to save important data and perform an orderly system shutdown. Automatic Voltage Regulation (AVR) Conserves Battery Power With an 800W capacity (1000VA) the line-interactive UPS system with automatic voltage regulation (AVR) maintains regulated 120V nominal output over an input range of 83V-147V without using battery power. Conserving power allows your LiFePO4 battery to last longer and maintain full capacity until needed. 6 Outlets Protect Your Mission-Critical Rack Equipment Plug your equipment into the six NEMA 5-15R outlets. Four outlets are split into two dual-outlet load banks that are switchable via network interface. These four outlets let you power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All six outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. High Efficiency Helps the Environment and Your Cash Flow Operating with a high 95% line-mode efficiency the 1kVA UPS system can save BTU heat output and energy costs. Advanced Communications Ports Connect to Any Workstation or Server USB and DB9 ports (cables are included) enable data-saving unattended shutdown when used with Tripp Lite's free downloadable PowerAlert® software. Capabilities include detailed monitoring of equipment load levels self-test data and utility power condition. The Emergency Power Off (EPO) interface offers options for instantaneous power-off of the UPS system and connected equipment in case of fire or other facility emergency. Optional Network Management Cards Allow Detailed Monitoring of Conditions The SMART1000RM2UL is compatible with Tripp Lite network management cards such as WEBCARDLX for detailed monitoring of UPS and site power conditions. |
| Maximum Operating Temperature | 104°F (40°C) |
| Package Contents |
|
| Plug/Connector Type | NEMA 5-15P |
| Product Line | SmartPro |
| Product Name | SmartPro SMART1000RM2UL 1kVA Rack/Tower UPS |
| Product Type | Line-interactive UPS |
| Rack Height | 2U |
| Receptacle Type | NEMA 5-15R |
| Sound Emission | 45.5 dB(A) |
| Status Indicators |
|
| Surge energy rating | 570 J |
| Thermal Dissipation | 41.32 W |
| Transfer Time | 4 ms |
| Typical Battery Recharge Time | 2.70 Hour |
| UPC Alternates | 037332213099 |
| Weight (Approximate) | 16.30 lb |
| Width | 17.4" |
Material Safety Data Sheet
A Material Safety Data Sheet (MSDS) is a document that contains information on the potential hazards (health, fire, reactivity and environmental) and how to work safely with the chemical product.