C2G

This HDBaseT kit extends HDMI and high speed USB 2.0 over a single Cat5e Cat6 or Cat6a network patch cable. Extend 4K HDMI up to 115 feet and 1080p up to 230 feet using a Cat5e or Cat6 cable. For longer 4K distances extend 4K HDMI up to 130 feet using a Cat6a cable. Extend USB 2.0 pass through up to 230ft connecting up to 4 USB devices to the receiver.

This kit is HDCP 2.2 compliant making sure that the connection from the source is secure. Multi-channel audio formats are supported including PCM 2.0/5.1/7.1 Dolby TrueHD Dolby Atmos DTS-HD Master Audio and DTS:X. High speed USB 2.0 pass-through supports up to 230ft for KVM control of devices such as USB cameras keyboards mice etc. With one-way Power over HDBaseT (PoH) support the transmitter gets its power from the receiver so no additional power adapter is required allowing for greater installation flexibility. Advanced users can control RS232 pass-through to pass RS232 commands between the wall plate and the receiver. The receiver toggle switch also allows for the selection of upgrades that can upgrade both the wall plate and receiver.

Support this HDBaseT system that is already deployed in the field by upgrading firmware through the Micro-USB port on front panel of the wall plate transmitter and upgrade the firmware through the RS232 port on rear panel of the receiver.

Note: Ensure a solid reliable connection between the 4K HDMI HDBaseT Extender and critical equipment. We suggest using HDMI Cables with gripping connectors that provide greater port retention than standard HDMI connectors.

• 1 x Transmitter
• 1 x Receiver
• 1 x DC 12V US Power Adapter
• 1 x Phoenix Connector (3.5mm 2 Pins)
• 2 x Phoenix Connector (3.5mm 3 Pins)
• 1 x 1 - Gang US Socket Cover White (with Screws)
• 2 x Mounting Brackets (with screws)
• 1 x Manual