Cisco IOM 2304V2XP I/O Module (4 External, 8 Internal 40Gb Ports)

Cisco IOM 2304V2XP I/O Module (4 External, 8 Internal 40Gb Ports)

New 
Cisco IOM 2304V2XP I/O Module (4 External, 8 Internal 40Gb Ports)
0 Review(s) Item: UCS-IOM-2304V2 | By: Cisco |  0 In Stock

Sorry This Product is Currently not Available to Buy.

Sorry This Product is Currently not Available to Buy.

You may be also interested
Cisco IOM 2304V2XP I/O Module (4 External, 8 Internal 40Gb Ports)

Product Specifications

Additional Information

Performance

  • Hardware forwarding at 960 Gbps
  • Low-latency cut-through design providing predictable consistent traffic latency regardless of packet size traffic pattern or enabled features

Layer 2

  • Layer 2 VLAN trunks
  • IEEE 802.1Q VLAN encapsulation
  • Support for up to 1024 VLANs and Virtual SANs (VSANs)
  • Support for Data Center VM-FEX architecture
  • Jumbo frames on all ports (up to 9216 bytes)
  • Pause frames (IEEE 802.3x)

QoS

  • Layer 2 IEEE 802.1p (Class of Service [CoS])
  • CoS-based egress queuing
  • Egress strict-priority queuing
  • Egress port-based scheduling: Weighted Round-Robin (WRR)
  • Eight hardware queues per port

High availability

  • Up to two fabric extenders can work in the Cisco UCS 5100 Series Blade Server Chassis
  • Active-active data-plane operation with failover
  • Capability to fail over from one fabric extender to another in the event of a failure
  • Active-passive management-plane operation
  • Support for nonstop management-plane functions; if the active fabric extender fails the passive fabric extender takes over the chassis management functions

Management

  • Management of fabric extenders integrated into Cisco UCS Manager
  • Capability to manage blade server chassis components such as power supplies fans and blades in conjunction with the fabric interconnect
  • Firmware levels between the fabric extender and fabric interconnect always synchronized

Low-Latency Lossless 40 Gigabit Ethernet Unified Network Fabric

  • PFC (per-priority pause frame support)
  • Data Center Bridging Exchange (DCBX) Protocol
  • IEEE 802.1Qaz: Bandwidth management

Industry standards

  • IEEE 802.1p: CoS prioritization
  • IEEE 802.1Q: VLAN tagging
  • IEEE 802.3: Ethernet
  • IEEE 802.3ad: Link Aggregation Control Protocol (LACP)
  • IEEE 802.3ba: 40 Gigabit Ethernet
  • QSFP+ support

Additional Information

Performance

  • Hardware forwarding at 960 Gbps
  • Low-latency cut-through design providing predictable consistent traffic latency regardless of packet size traffic pattern or enabled features

Layer 2

  • Layer 2 VLAN trunks
  • IEEE 802.1Q VLAN encapsulation
  • Support for up to 1024 VLANs and Virtual SANs (VSANs)
  • Support for Data Center VM-FEX architecture
  • Jumbo frames on all ports (up to 9216 bytes)
  • Pause frames (IEEE 802.3x)

QoS

  • Layer 2 IEEE 802.1p (Class of Service [CoS])
  • CoS-based egress queuing
  • Egress strict-priority queuing
  • Egress port-based scheduling: Weighted Round-Robin (WRR)
  • Eight hardware queues per port

High availability

  • Up to two fabric extenders can work in the Cisco UCS 5100 Series Blade Server Chassis
  • Active-active data-plane operation with failover
  • Capability to fail over from one fabric extender to another in the event of a failure
  • Active-passive management-plane operation
  • Support for nonstop management-plane functions; if the active fabric extender fails the passive fabric extender takes over the chassis management functions

Management

  • Management of fabric extenders integrated into Cisco UCS Manager
  • Capability to manage blade server chassis components such as power supplies fans and blades in conjunction with the fabric interconnect
  • Firmware levels between the fabric extender and fabric interconnect always synchronized

Low-Latency Lossless 40 Gigabit Ethernet Unified Network Fabric

  • PFC (per-priority pause frame support)
  • Data Center Bridging Exchange (DCBX) Protocol
  • IEEE 802.1Qaz: Bandwidth management

Industry standards

  • IEEE 802.1p: CoS prioritization
  • IEEE 802.1Q: VLAN tagging
  • IEEE 802.3: Ethernet
  • IEEE 802.3ad: Link Aggregation Control Protocol (LACP)
  • IEEE 802.3ba: 40 Gigabit Ethernet
  • QSFP+ support

Additional Information

Performance

  • Hardware forwarding at 960 Gbps
  • Low-latency cut-through design providing predictable consistent traffic latency regardless of packet size traffic pattern or enabled features

Layer 2

  • Layer 2 VLAN trunks
  • IEEE 802.1Q VLAN encapsulation
  • Support for up to 1024 VLANs and Virtual SANs (VSANs)
  • Support for Data Center VM-FEX architecture
  • Jumbo frames on all ports (up to 9216 bytes)
  • Pause frames (IEEE 802.3x)

QoS

  • Layer 2 IEEE 802.1p (Class of Service [CoS])
  • CoS-based egress queuing
  • Egress strict-priority queuing
  • Egress port-based scheduling: Weighted Round-Robin (WRR)
  • Eight hardware queues per port

High availability

  • Up to two fabric extenders can work in the Cisco UCS 5100 Series Blade Server Chassis
  • Active-active data-plane operation with failover
  • Capability to fail over from one fabric extender to another in the event of a failure
  • Active-passive management-plane operation
  • Support for nonstop management-plane functions; if the active fabric extender fails the passive fabric extender takes over the chassis management functions

Management

  • Management of fabric extenders integrated into Cisco UCS Manager
  • Capability to manage blade server chassis components such as power supplies fans and blades in conjunction with the fabric interconnect
  • Firmware levels between the fabric extender and fabric interconnect always synchronized

Low-Latency Lossless 40 Gigabit Ethernet Unified Network Fabric

  • PFC (per-priority pause frame support)
  • Data Center Bridging Exchange (DCBX) Protocol
  • IEEE 802.1Qaz: Bandwidth management

Industry standards

  • IEEE 802.1p: CoS prioritization
  • IEEE 802.1Q: VLAN tagging
  • IEEE 802.3: Ethernet
  • IEEE 802.3ad: Link Aggregation Control Protocol (LACP)
  • IEEE 802.3ba: 40 Gigabit Ethernet
  • QSFP+ support

Additional Information

Performance

  • Hardware forwarding at 960 Gbps
  • Low-latency cut-through design providing predictable consistent traffic latency regardless of packet size traffic pattern or enabled features

Layer 2

  • Layer 2 VLAN trunks
  • IEEE 802.1Q VLAN encapsulation
  • Support for up to 1024 VLANs and Virtual SANs (VSANs)
  • Support for Data Center VM-FEX architecture
  • Jumbo frames on all ports (up to 9216 bytes)
  • Pause frames (IEEE 802.3x)

QoS

  • Layer 2 IEEE 802.1p (Class of Service [CoS])
  • CoS-based egress queuing
  • Egress strict-priority queuing
  • Egress port-based scheduling: Weighted Round-Robin (WRR)
  • Eight hardware queues per port

High availability

  • Up to two fabric extenders can work in the Cisco UCS 5100 Series Blade Server Chassis
  • Active-active data-plane operation with failover
  • Capability to fail over from one fabric extender to another in the event of a failure
  • Active-passive management-plane operation
  • Support for nonstop management-plane functions; if the active fabric extender fails the passive fabric extender takes over the chassis management functions

Management

  • Management of fabric extenders integrated into Cisco UCS Manager
  • Capability to manage blade server chassis components such as power supplies fans and blades in conjunction with the fabric interconnect
  • Firmware levels between the fabric extender and fabric interconnect always synchronized

Low-Latency Lossless 40 Gigabit Ethernet Unified Network Fabric

  • PFC (per-priority pause frame support)
  • Data Center Bridging Exchange (DCBX) Protocol
  • IEEE 802.1Qaz: Bandwidth management

Industry standards

  • IEEE 802.1p: CoS prioritization
  • IEEE 802.1Q: VLAN tagging
  • IEEE 802.3: Ethernet
  • IEEE 802.3ad: Link Aggregation Control Protocol (LACP)
  • IEEE 802.3ba: 40 Gigabit Ethernet
  • QSFP+ support

Brand NameCisco
Brand NameCisco
Brand NameCisco
Brand NameCisco
Country of originChina
Country of originChina
Country of originChina
Country of originChina
Depth7.2"
Depth7.2"
Depth7.2"
Depth7.2"
Environmentally FriendlyYes
Environmentally FriendlyYes
Environmentally FriendlyYes
Environmentally FriendlyYes
Height7.6"
Height7.6"
Height7.6"
Height7.6"
ManufacturerCisco Systems Inc
ManufacturerCisco Systems Inc
ManufacturerCisco Systems Inc
ManufacturerCisco Systems Inc
Manufacturer Part NumberUCS-IOM-2304V2
Manufacturer Part NumberUCS-IOM-2304V2
Manufacturer Part NumberUCS-IOM-2304V2
Manufacturer Website Addresshttp://www.cisco.com
Manufacturer Website Addresshttp://www.cisco.com
Manufacturer Website Addresshttp://www.cisco.com
Manufacturer Website Addresshttp://www.cisco.com
Marketing Information

Cisco UCS 2304 Fabric Extender

The Cisco UCS 2304 Fabric Extender has four 40 Gigabit Ethernet FCoE-capable Quad Small Form-Factor Pluggable (QSFP+) ports that connect the blade chassis to the fabric interconnect. Each Cisco UCS 2304 can provide one 40 Gigabit Ethernet ports connected through the midplane to each half-width slot in the chassis giving it a total eight 40G interfaces to the compute. Typically configured in pairs for redundancy two fabric extenders provide up to 320 Gbps of I/O to the chassis.

Marketing Information

Cisco UCS 2304 Fabric Extender

The Cisco UCS 2304 Fabric Extender has four 40 Gigabit Ethernet FCoE-capable Quad Small Form-Factor Pluggable (QSFP+) ports that connect the blade chassis to the fabric interconnect. Each Cisco UCS 2304 can provide one 40 Gigabit Ethernet ports connected through the midplane to each half-width slot in the chassis giving it a total eight 40G interfaces to the compute. Typically configured in pairs for redundancy two fabric extenders provide up to 320 Gbps of I/O to the chassis.

Marketing Information

Cisco UCS 2304 Fabric Extender

The Cisco UCS 2304 Fabric Extender has four 40 Gigabit Ethernet FCoE-capable Quad Small Form-Factor Pluggable (QSFP+) ports that connect the blade chassis to the fabric interconnect. Each Cisco UCS 2304 can provide one 40 Gigabit Ethernet ports connected through the midplane to each half-width slot in the chassis giving it a total eight 40G interfaces to the compute. Typically configured in pairs for redundancy two fabric extenders provide up to 320 Gbps of I/O to the chassis.

Marketing Information

Cisco UCS 2304 Fabric Extender

The Cisco UCS 2304 Fabric Extender has four 40 Gigabit Ethernet FCoE-capable Quad Small Form-Factor Pluggable (QSFP+) ports that connect the blade chassis to the fabric interconnect. Each Cisco UCS 2304 can provide one 40 Gigabit Ethernet ports connected through the midplane to each half-width slot in the chassis giving it a total eight 40G interfaces to the compute. Typically configured in pairs for redundancy two fabric extenders provide up to 320 Gbps of I/O to the chassis.

Product Model2304 V2
Product Model2304 V2
Product Model2304 V2
Product Model2304 V2
Product NameIOM 2304V2XP I/O Module (4 External 8 Internal 40Gb Ports)
Product NameIOM 2304V2XP I/O Module (4 External 8 Internal 40Gb Ports)
Product NameIOM 2304V2XP I/O Module (4 External 8 Internal 40Gb Ports)
Product NameIOM 2304V2XP I/O Module (4 External 8 Internal 40Gb Ports)
Product TypeFabric Extender
Product TypeFabric Extender
Product TypeFabric Extender
Product TypeFabric Extender
UPC Alternates889728209700
UPC Alternates889728209700
UPC Alternates889728209700
Weight (Approximate)2.80 lb
Weight (Approximate)2.80 lb
Weight (Approximate)2.80 lb
Weight (Approximate)2.80 lb
Width1.4"
Width1.4"
Width1.4"
Width1.4"

Material Safety Data Sheet
A Material Safety Data Sheet (MSDS) is a document that contains information on the potential hazards (health, fire, reactivity and environmental) and how to work safely with the chemical product.

Sorry this product does not have any reviews at this time.
How do you rate this product?

Recently Viewed Products
Time to Rendor : 0.171875
Powered by Power-eCommerce.com