Tripp Lite 2000W Compact Power Inverter Mobile Portable 4 Outlet 2 USB Port
| $626.42 Retail $988.00 |
- Converts 12V DC power from your vehicle's battery into 120V AC &5V DC power to operate and charge electronics while on the road.
- Provides portable power for mobile devices, including phones &laptops
- Ideal for areas without regular power outlets, such as campsites or construction sites
- Four 5-15/20R GFCI outlets deliver continuous output of 2000W for powering devices
- High Surge Output: 3000W (up to 60 minutes); Peak Surge Output: 4000W
- Two USB charging ports supply 2A to keep smartphones and tablets at full capacity
- Rugged aluminum housing built to withstand rigors of travel and outdoor use
- 2-year limited warranty
Input Voltage: 12 V DC - Output Voltage: 110 V AC, 115 V AC, 120 V AC, 5 V DC
Product Specifications
| Continuous Power Load | 2000 W |
| Peak Power Load | 4000 W |
| Waveform Type | Pulse-width Modulated Sine Wave |
| Brand Name | Tripp Lite |
| Certifications & Standards | Tested for UL458: 2015 6th EDITION; CAN / CSA-C22.2 Nš107.1: 2016 4th EDITION |
| Country of origin | China |
| Depth | 14.4" |
| Environmental Certification | RoHS |
| Environmentally Friendly | Yes |
| Height | 4.6" |
| Input voltage | 12 V DC |
| Limited Warranty | 2 Year |
| Manufacturer | Tripp Lite by Eaton |
| Manufacturer Part Number | PINV2000HS |
| Manufacturer Website Address | http://www.tripplite.com |
| Marketing Information | Heavy-Duty Power Inverter Charges and Powers Multiple Electronic Devices in Your Vehicle You don't have to be near your computer or an AC power source to keep your mobile devices fully charged and your power tools and small appliances operating. This 2000W mobile inverter converts 12V DC power from your car truck fleet vehicle boat or RV's battery into standard 120V AC power. Just connect the included battery cables between the inverter's DC input terminals and the positive and negative terminals on your vehicle's battery. 4 GFCI-Protected AC Outlets Provide Portable Power for Your Mobile Applications This power inverter provides a modified sine wave for use at remote locations such as campgrounds construction sites and mobile offices. Four NEMA 5-15/20R outlets deliver a continuous output of 2000 watts a High Surge Mode that supports 3000 watts up to one hour and a peak output of 4000 watts. That's plenty to operate a variety of appliances and power tools such as low-power lights camping accessories battery rechargers for small battery-operated power tools and mobile office equipment. All outlets have OSHA-compliant GFCI (Ground-Fault Circuit Interrupter) protection to shield you from electrical hazards due to excessive fault current. USB Charging Ports Keep Your Devices at Full Strength Two USB-A charging ports share 2 amps of charging capacity and remain active even when the inverter's on/off switch is set to Off. This allows you to charge your smartphone tablet laptop MP3 player or GPS unit without draining too much power from the vehicle's battery. Includes the Latest Safety Features to Protect Your Equipment and Battery An on/off switch offers one-touch control over all AC outlets. If the power input from the vehicle's battery drops below 10 volts or exceeds 16 volts the mobile power inverter will automatically shut down. Green and red LEDs indicate normal and improper operation. The temperature controlled fans begin cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively high or low voltage conditions. Remote Control Panel Allows Power Control from 20 ft. Away A remote panel is included to extend on/off control over AC power output from a remote location. The wired panel connects to the PINV2000HS's RJ11 port and can be permanently installed inside your vehicle with user-supplied hardware. This allows you to mount the inverter somewhere out of sight like inside a glove compartment or cabinet and be able to operate it from your vehicle's dashboard. The panel's green LED confirms the inverter is powered on. Brackets Included for Permanent Mounting The heavy-duty power inverter's durable aluminum housing is designed to withstand the rigors of road trips campouts business trips and family vacations. Use the built-in mounting brackets and your own hardware to install the inverter permanently in a horizontal position. |
| Maximum Frequency | 60 Hz |
| Output voltage | 5 V DC |
| Output voltage | 110 V AC |
| Output voltage | 120 V AC |
| Output voltage | 115 V AC |
| Package Contents |
|
| Plug/Connector Type | Terminal Block |
| Product color | White |
| Product Name | PINV2000HS Power Inverter |
| Product Type | Power Inverter |
| Protection Type | Overload Protection |
| Receptacles | 4 x NEMA 5-15/20R |
| Receptacles | 2 x USB |
| UPC Alternates | 037332225146 |
| Weight (Approximate) | 11.29 lb |
| Width | 10.5" |
Material Safety Data Sheet
A Material Safety Data Sheet (MSDS) is a document that contains information on the potential hazards (health, fire, reactivity and environmental) and how to work safely with the chemical product.