Tripp Lite MTP/MPO (APC) SMF Fiber Patch Cable 12 Fiber QSFP+ 40/100Gbe 2M

Tripp Lite MTP/MPO (APC) SMF Fiber Patch Cable 12 Fiber QSFP+ 40/100Gbe 2M

New 
Tripp Lite MTP/MPO (APC) SMF Fiber Patch Cable 12 Fiber QSFP+ 40/100Gbe 2M - Fiber Optic for Network Device, Switch, Hub, Router, Patch Panel - 12.50 GB/s - Patch Cable - 6.56 ft - 1 x MTP/MPO Female Network - 1 x MTP/MPO Female Network - 8.3/125 µm - Yellow
0 Review(s) Item: N390-02M-12-AP | By: Tripp Lite |  48 In Stock
$193.77 Retail $302.40
  • Push/pull tab connectors easily install/remove with one hand
  • 12-fiber MTP/MPO connectors with 12x density of SC connectors
  • 100% tested for low insertion loss and back reflection
  • Angled APC connectors protect laser against destabilization
  • Yellow color for easy singlemode identification
More Details

100% Quality & Money Back Guaranteed!


You may be also interested
Tripp Lite MTP/MPO (APC) SMF Fiber Patch Cable 12 Fiber QSFP+ 40/100Gbe 2M - Fiber Optic for Network Device, Switch, Hub, Router, Patch Panel - 12.50 GB/s - Patch Cable - 6.56 ft - 1 x MTP/MPO Female Network - 1 x MTP/MPO Female Network - 8.3/125 µm - Yellow
Fiber Optic for Network Device, Switch, Hub, Router, Patch Panel - 12.50 GB/s - Patch Cable - 6.56 ft - 1 x MTP/MPO Female Network - 1 x MTP/MPO Female Network - 8.3/125 µm - Yellow

Product Specifications

Connector on First End Details1 x MTP/MPO Network - Female
Connector Type on First EndMTP/MPO Network - Female
Brand NameTripp Lite
Brand NameTripp Lite
Cable CharacteristicPatch Cable
Cable CharacteristicPatch Cable
Cable length6.60 ft
Cable length6.60 ft
Cable typeFiber Optic
Cable typeFiber Optic
ColorYellow
ColorYellow
Connector on First EndMTP/MPO Female Network
Connector on First EndMTP/MPO Female Network
Connector on First End1 x MTP/MPO Female Network
Connector on First End1 x MTP/MPO Female Network
Core/Cladding Diameter8.3/125 µm
Core/Cladding Diameter8.3/125 µm
Country of originChina
Country of originChina
Data transfer rate100 Gbit/s
Data transfer rate100 Gbit/s
Device SupportedNetwork Device
Device SupportedSwitch
Device SupportedPatch Panel
Device SupportedRouter
Device SupportedRouter
Device SupportedNetwork Device
Device SupportedSwitch
Device SupportedPatch Panel
Device SupportedHub
Device SupportedHub
Environmental CertificationRoHS
Environmental CertificationRoHS
Environmentally FriendlyYes
Environmentally FriendlyYes
FeaturesAngled Connector
FeaturesAngled Connector
Fiber Optic ModeSingle-mode
Fiber Optic ModeSingle-mode
Limited WarrantyLifetime
Limited WarrantyLifetime
ManufacturerTripp Lite by Eaton
ManufacturerTripp Lite by Eaton
Manufacturer Part NumberN39002M12AP
Manufacturer Part NumberN390-02M-12-AP
Manufacturer Part NumberN390-02M-12-AP
Manufacturer Website Addresshttp://www.tripplite.com
Manufacturer Website Addresshttp://www.tripplite.com
Marketing Information

The N390-02M-12-AP MTP/MPO Singlemode Patch Cable (F/F) supports 40/100 Gb Ethernet speeds and is designed for QSFP+ applications in enterprise installations in wiring closets telecom rooms and data centers. With two female MTP/MPO connectors this singlemode fiber optic cable with plenum-rated jacket is recommended for connecting switches hubs routers and other high-speed network components in ceilings walls and ducts.

The 12-fiber MTP/MPO connectors are about the same size as SC connectors but are 12 times denser freeing up rack space for other cables. The APC connectors are angled to prevent infrared light entering the fiber from bouncing back into the laser. The N390-02M-12-AP is tested for low insertion loss and back reflection on every connector and attenuation loss that meets or exceeds current standards.

The N390-02M-12-AP is colored yellow for instant identification in a crowded switch or patch panel as a singlemode cable. Push/pull tab connectors are easily accessible in high-density data center environments and make the plug-and-play cable easy to install and remove with one hand.

Marketing Information

The N390-02M-12-AP MTP/MPO Singlemode Patch Cable (F/F) supports 40/100 Gb Ethernet speeds and is designed for QSFP+ applications in enterprise installations in wiring closets telecom rooms and data centers. With two female MTP/MPO connectors this singlemode fiber optic cable with plenum-rated jacket is recommended for connecting switches hubs routers and other high-speed network components in ceilings walls and ducts.

The 12-fiber MTP/MPO connectors are about the same size as SC connectors but are 12 times denser freeing up rack space for other cables. The APC connectors are angled to prevent infrared light entering the fiber from bouncing back into the laser. The N390-02M-12-AP is tested for low insertion loss and back reflection on every connector and attenuation loss that meets or exceeds current standards.

The N390-02M-12-AP is colored yellow for instant identification in a crowded switch or patch panel as a singlemode cable. Push/pull tab connectors are easily accessible in high-density data center environments and make the plug-and-play cable easy to install and remove with one hand.

Product colorYellow
Product ModelN390-02M-12-AP
Product NameN390-02M-12-AP MTP/MPO Singlemode Patch Cable (F/F) Yellow 2 m
Product NameN390-02M-12-AP MTP/MPO Singlemode Patch Cable (F/F) Yellow 2 m
Product TypeNetwork Cable
Product TypeNetwork Cable
UPC Alternates037332205353
UPC Alternates037332205353

Material Safety Data Sheet
A Material Safety Data Sheet (MSDS) is a document that contains information on the potential hazards (health, fire, reactivity and environmental) and how to work safely with the chemical product.

Sorry this product does not have any reviews at this time.
How do you rate this product?

Time to Rendor : 0.4804688
Powered by Power-eCommerce.com