Cisco 4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D)

Cisco 4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D)

New 
Cisco 4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D) - Range - UHF - 698 MHz to 960 MHz, 1447 MHz to 1511 MHz, 1710 MHz to 2690 MHz - 3.7 dBi - Wireless Router, ModuleOmni-directional - SMA Connector
0 Review(s) Item: LTE-ANTM-SMA-D | By: Cisco |  0 In Stock

Sorry This Product is Currently not Available to Buy.

  • Eases up the installation procedure thanks to its 360-degree horizontal pattern
  • Operates at 3.7 dBi gain
  • Due to its broader casting range, it provides improved wireless router signals
More Details
Sorry This Product is Currently not Available to Buy.

You may be also interested
Cisco 4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D) - Range - UHF - 698 MHz to 960 MHz, 1447 MHz to 1511 MHz, 1710 MHz to 2690 MHz - 3.7 dBi - Wireless Router, ModuleOmni-directional - SMA Connector
Range - UHF - 698 MHz to 960 MHz, 1447 MHz to 1511 MHz, 1710 MHz to 2690 MHz - 3.7 dBi - Wireless Router, ModuleOmni-directional - SMA Connector

Product Specifications

Antenna Gain3.7 dBi
Antenna Gain3.7 dBi
Antenna Gain (Isotropic)3.7 dBi
DirectivityOmni-directional
DirectivityOmni-directional
Frequency Band TypeUHF
Frequency Band TypeUHF
Operating Frequency Range1710 MHz to 2690 MHz
Operating Frequency Range1447 MHz to 1511 MHz
Operating Frequency Range698 MHz to 960 MHz
Operating Frequency Range1710 MHz to 2690 MHz
Operating Frequency Range1447 MHz to 1511 MHz
Operating Frequency Range698 MHz to 960 MHz
Application/UsageWireless Router
Application/UsageWireless Router
Application/UsageModule
Application/UsageModule
Brand NameCisco
Brand NameCisco
Connector TypeSMA
Connector TypeSMA
Depth0.43"
Depth0.43"
Height9"
Height9"
Limited Warranty90 Day
Limited Warranty90 Day
ManufacturerCisco Systems Inc
ManufacturerCisco Systems Inc
Manufacturer Part NumberLTE-ANTM-SMA-D
Manufacturer Part NumberLTE-ANTM-SMA-D
Manufacturer Website Addresshttp://www.cisco.com
Manufacturer Website Addresshttp://www.cisco.com
Marketing Information

The LTE-ANTM-SMA-D omnidirectional dipole antenna is designed for indoor use with Cisco 4G Long Term Evolution (LTE) and Long Term Evolution Advanced (LTEA) Service Routers (ISRs) and Pluggable Modules with an SMA connector.

The LTE-ANTM-SMA-D antenna is marked with a dual green band to indicate that it supports Cisco LTEA routers and modules.

This antenna has the following features:

  • Support for frequencies of 698-960 1448-1511 and 1710-2690 MHz.
  • Standalone antenna peak gain of less than 3.7 dBi in the supported frequency bands.
  • Articulating joint that can maneuver into three stop positions: 0° 45° and 90°.
  • Male SubMiniature A connector that allows direct mounting of the antenna to any Cisco supported router or Pluggable Module with an SMA connector.
  • The SMA connector design has added rotational frictional torque to ensure the SMA interface stays properly mated and to reduce chances of a disconnect. The design is also more finger friendly compared to a classic SMA hex nut design.


For optimal performance we strongly recommend that you use two antennas to take full advantage of MIMO technology on all Cisco cellular routers that support MIMO (4G LTE and later releases).

Marketing Information

The LTE-ANTM-SMA-D omnidirectional dipole antenna is designed for indoor use with Cisco 4G Long Term Evolution (LTE) and Long Term Evolution Advanced (LTEA) Service Routers (ISRs) and Pluggable Modules with an SMA connector.

The LTE-ANTM-SMA-D antenna is marked with a dual green band to indicate that it supports Cisco LTEA routers and modules.

This antenna has the following features:

  • Support for frequencies of 698-960 1448-1511 and 1710-2690 MHz.
  • Standalone antenna peak gain of less than 3.7 dBi in the supported frequency bands.
  • Articulating joint that can maneuver into three stop positions: 0° 45° and 90°.
  • Male SubMiniature A connector that allows direct mounting of the antenna to any Cisco supported router or Pluggable Module with an SMA connector.
  • The SMA connector design has added rotational frictional torque to ensure the SMA interface stays properly mated and to reduce chances of a disconnect. The design is also more finger friendly compared to a classic SMA hex nut design.


For optimal performance we strongly recommend that you use two antennas to take full advantage of MIMO technology on all Cisco cellular routers that support MIMO (4G LTE and later releases).

Product Name4G LTEA 4G LTE and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D)
Product Name4G LTEA 4G LTE and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D)
Product TypeAntenna
Product TypeAntenna
UPC Alternates889728146838
UPC Alternates889728146838
Weight (Approximate)2 oz
Weight (Approximate)2 oz
Width1.46"
Width1.46"

Material Safety Data Sheet
A Material Safety Data Sheet (MSDS) is a document that contains information on the potential hazards (health, fire, reactivity and environmental) and how to work safely with the chemical product.

Sorry this product does not have any reviews at this time.
How do you rate this product?

Time to Rendor : 0.3359375
Powered by Power-eCommerce.com